Returns a new set with the elements that are common to both this set and
the given set.
In the following example, the `bothNeighborsAndEmployees` set is made up
of the elements that are in *both* the `employees` and `neighbors` sets.
Elements that are in only one or the other are left out of the result of
the intersection.
let employees: Set = ["Alicia", "Bethany", "Chris", "Diana", "Eric"]
let neighbors: Set = ["Bethany", "Eric", "Forlani", "Greta"]
let bothNeighborsAndEmployees = employees.intersection(neighbors)
print(bothNeighborsAndEmployees)
// Prints "["Bethany", "Eric"]"
- Parameter other: A set of the same type as the current set.
- Returns: A new set.
- Note: if this set and `other` contain elements that are equal but
distinguishable (e.g. via `===`), which of these elements is present
in the result is unspecified.
get · iOS 15.0+
switchControl
TypeScript
static get switchControl(): AccessibilityTechnologies
Swift declaration
static let switchControl: AccessibilityTechnologies
The value that represents a Switch Control, allowing the use of the
entire system using controller buttons, a breath-controlled switch or
similar hardware.
Removes the elements of this set that aren't also in the given set.
In the following example, the elements of the `employees` set that are
not also members of the `neighbors` set are removed. In particular, the
names `"Alicia"`, `"Chris"`, and `"Diana"` are removed.
var employees: Set = ["Alicia", "Bethany", "Chris", "Diana", "Eric"]
let neighbors: Set = ["Bethany", "Eric", "Forlani", "Greta"]
employees.formIntersection(neighbors)
print(employees)
// Prints "["Bethany", "Eric"]"
- Parameter other: A set of the same type as the current set.
Returns a new set with the elements that are either in this set or in the
given set, but not in both.
In the following example, the `eitherNeighborsOrEmployees` set is made up
of the elements of the `employees` and `neighbors` sets that are not in
both `employees` *and* `neighbors`. In particular, the names `"Bethany"`
and `"Eric"` do not appear in `eitherNeighborsOrEmployees`.
let employees: Set = ["Alicia", "Bethany", "Diana", "Eric"]
let neighbors: Set = ["Bethany", "Eric", "Forlani"]
let eitherNeighborsOrEmployees = employees.symmetricDifference(neighbors)
print(eitherNeighborsOrEmployees)
// Prints "["Diana", "Forlani", "Alicia"]"
- Parameter other: A set of the same type as the current set.
- Returns: A new set.
Removes the elements of the set that are also in the given set and adds
the members of the given set that are not already in the set.
In the following example, the elements of the `employees` set that are
also members of `neighbors` are removed from `employees`, while the
elements of `neighbors` that are not members of `employees` are added to
`employees`. In particular, the names `"Bethany"` and `"Eric"` are
removed from `employees` while the name `"Forlani"` is added.
var employees: Set = ["Alicia", "Bethany", "Diana", "Eric"]
let neighbors: Set = ["Bethany", "Eric", "Forlani"]
employees.formSymmetricDifference(neighbors)
print(employees)
// Prints "["Diana", "Forlani", "Alicia"]"
- Parameter other: A set of the same type.
Returns a new set with the elements of both this and the given set.
In the following example, the `attendeesAndVisitors` set is made up
of the elements of the `attendees` and `visitors` sets:
let attendees: Set = ["Alicia", "Bethany", "Diana"]
let visitors = ["Marcia", "Nathaniel"]
let attendeesAndVisitors = attendees.union(visitors)
print(attendeesAndVisitors)
// Prints "["Diana", "Nathaniel", "Bethany", "Alicia", "Marcia"]"
If the set already contains one or more elements that are also in
`other`, the existing members are kept.
let initialIndices = Set(0..<5)
let expandedIndices = initialIndices.union([2, 3, 6, 7])
print(expandedIndices)
// Prints "[2, 4, 6, 7, 0, 1, 3]"
- Parameter other: A set of the same type as the current set.
- Returns: A new set with the unique elements of this set and `other`.
- Note: if this set and `other` contain elements that are equal but
distinguishable (e.g. via `===`), which of these elements is present
in the result is unspecified.
Inserts the given element in the set if it is not already present.
If an element equal to `newMember` is already contained in the set, this
method has no effect. In this example, a new element is inserted into
`classDays`, a set of days of the week. When an existing element is
inserted, the `classDays` set does not change.
enum DayOfTheWeek: Int {
case sunday, monday, tuesday, wednesday, thursday,
friday, saturday
}
var classDays: Set<DayOfTheWeek> = [.wednesday, .friday]
print(classDays.insert(.monday))
// Prints "(true, .monday)"
print(classDays)
// Prints "[.friday, .wednesday, .monday]"
print(classDays.insert(.friday))
// Prints "(false, .friday)"
print(classDays)
// Prints "[.friday, .wednesday, .monday]"
- Parameter newMember: An element to insert into the set.
- Returns: `(true, newMember)` if `newMember` was not contained in the
set. If an element equal to `newMember` was already contained in the
set, the method returns `(false, oldMember)`, where `oldMember` is the
element that was equal to `newMember`. In some cases, `oldMember` may
be distinguishable from `newMember` by identity comparison or some
other means.
Removes the given element and any elements subsumed by the given element.
- Parameter member: The element of the set to remove.
- Returns: For ordinary sets, an element equal to `member` if `member` is
contained in the set; otherwise, `nil`. In some cases, a returned
element may be distinguishable from `member` by identity comparison
or some other means.
For sets where the set type and element type are the same, like
`OptionSet` types, this method returns any intersection between the set
and `[member]`, or `nil` if the intersection is empty.
Inserts the given element into the set unconditionally.
If an element equal to `newMember` is already contained in the set,
`newMember` replaces the existing element. In this example, an existing
element is inserted into `classDays`, a set of days of the week.
enum DayOfTheWeek: Int {
case sunday, monday, tuesday, wednesday, thursday,
friday, saturday
}
var classDays: Set<DayOfTheWeek> = [.monday, .wednesday, .friday]
print(classDays.update(with: .monday))
// Prints "Optional(.monday)"
- Parameter newMember: An element to insert into the set.
- Returns: For ordinary sets, an element equal to `newMember` if the set
already contained such a member; otherwise, `nil`. In some cases, the
returned element may be distinguishable from `newMember` by identity
comparison or some other means.
For sets where the set type and element type are the same, like
`OptionSet` types, this method returns any intersection between the
set and `[newMember]`, or `nil` if the intersection is empty.
Returns a Boolean value that indicates whether the given element exists
in the set.
This example uses the `contains(_:)` method to test whether an integer is
a member of a set of prime numbers.
let primes: Set = [2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37]
let x = 5
if primes.contains(x) {
print("\(x) is prime!")
} else {
print("\(x). Not prime.")
}
// Prints "5 is prime!"
- Parameter member: An element to look for in the set.
- Returns: `true` if `member` exists in the set; otherwise, `false`.
Adds the elements of the given set to the set.
In the following example, the elements of the `visitors` set are added to
the `attendees` set:
var attendees: Set = ["Alicia", "Bethany", "Diana"]
let visitors: Set = ["Diana", "Marcia", "Nathaniel"]
attendees.formUnion(visitors)
print(attendees)
// Prints "["Diana", "Nathaniel", "Bethany", "Alicia", "Marcia"]"
If the set already contains one or more elements that are also in
`other`, the existing members are kept.
var initialIndices = Set(0..<5)
initialIndices.formUnion([2, 3, 6, 7])
print(initialIndices)
// Prints "[2, 4, 6, 7, 0, 1, 3]"
- Parameter other: A set of the same type as the current set.
get · iOS 15.0+
voiceOver
TypeScript
static get voiceOver(): AccessibilityTechnologies
Swift declaration
static let voiceOver: AccessibilityTechnologies
The value that represents the VoiceOver screen reader, allowing use
of the system without seeing the screen visually.
init · iOS 15.0+
init
TypeScript
static init(): AccessibilityTechnologies
Swift declaration
init()
Creates a new accessibility technologies structure with an empy
accessibility technology set.
